XL-7 2WD V6-3.6L (2007)
Tighten the screws to 1.5 N.m (13 lb.in).
4. Install the blower motor control module to the blower case assembly.
5. Install the blower motor control module screws to the blower case assembly.
Tightening torque
Tighten the screws to 1.5 N.m (13 lb.in).
6. Install the blower motor to the blower case assembly.
7. Install the blower motor screws to the blower case assembly.
Tightening torque
Tighten the screws to 1.5 N.m (13 lb.in).
8. Install the air inlet assembly. Refer to [Air Inlet Assembly Replacement].
9. Install the evaporator case assembly. Refer to [Air Conditioning (A/C) Evaporator Case Assembly Replacement].
10. Install the HVAC module. Refer to [HVAC Module Assembly Replacement].