XL-7 2WD V6-3.6L (2007)
Audible Warning Device: Description and Operation
Audible Warnings Description and Operation
The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings. The BCM receives
audible warning requests via the class 2 serial data line or the controller area network (CAN) data line. If the BCM receives multiple audible warning
requests, the warning with the highest priority sounds first.
The following lists the audible warning priority and the pulse rate:
1. Fast rate chime--200 pulses per minute
2. Medium rate chime--150 pulses per minute
3. Slow rate chime--50 pulses per minute
4. Single chime
Fasten Safety Belt Warning
The body control module (BCM) activates the fasten safety belt audible warning as requested by the sensing and diagnostic module (SDM). The SDM
sends a class 2 message to the BCM. The fasten safety belt warning sounds and the fasten safety belt indicator illuminates when the following occurs:
^
The ignition switch transitions to ON.
^
The inflatable restraint SDM detects that the driver seat belt is not buckled and or the signal is low. The BCM receives a class 2 message from the
SDM indicating the driver seat belt status.
If the seat belt is buckled when the ignition is turned ON, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime
stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.
Key in Ignition Warning
The BCM monitors the signal circuit of the ignition switch. The BCM activates the key-in-ignition audible warning. The key-in-ignition warning sounds
when the following occurs:
^
The ignition switch is OFF.
^
The BCM determines that the driver door is open and the signal circuit is low.
^
The BCM determines that the key-in-ignition switch is closed and the signal circuit is low.
Lights On Warning
The BCM activates the lights on warning. The radio chimes a frequency of a fast rate and a continuous duration. The lights on warning sounds when the
following occurs:
^
The ignition is OFF.
^
The BCM determines that the driver door is open and the signal circuit is low.
^
The BCM determines that the headlamp switch is in the park or head position.
Park Brake Warning
The BCM activates the park brake audible warning.The park brake warning sounds and the BRAKE indicator illuminates when the following occurs:
^
The ignition is ON.
^
The vehicle speed is greater than 5 km/h (3.1 mph). The BCM receives a CAN serial message from the ECM indicating the vehicle speed.
^
The BCM determines that the park brake is engaged and the signal circuit is low.
