XL-7 2WD V6-3.6L (2007)
Audible Warning Device: Testing and Inspection
Chime Inoperative
Chime Inoperative
Diagnostic Instructions
^
Perform the [Diagnostic System Check - Vehicle Diagnostic Information] prior to using this diagnostic procedure. See: Testing and
Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check - Vehicle Diagnostic Information
^
Review [Strategy Based Diagnosis] for an overview of the diagnostic approach. See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Strategy Based Diagnosis
^
[Diagnostic Procedure Instructions - Vehicle Diagnostic Information]. See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic Procedure Instructions - Vehicle Diagnostic Information
Circuit/System Description
The body control module (BCM) generates the audible warning. The BCM receives audible warning requests via serial data.
Circuit/System Testing
1. Ignition OFF, key in the ignition, open the driver door. The courtesy lamps should illuminate
^
If the courtesy lamps do not illuminate, go to [Courtesy Lamps Inoperative].
2. If all circuits test normal, replace the BCM.
Repair Instructions
Perform the [Diagnostic Repair Verification - Vehicle Diagnostic Information] after completing the diagnostic procedure. See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures
^
[Control Module References] for the BCM replacement, setup, and programming See: Testing and Inspection/Programming and Relearning
