XL-7 2WD V6-3.6L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Inlet Pipe/Hose Replacement
Power Steering Gear Inlet Pipe/Hose Replacement
Removal Procedure
1. Remove the front tire/wheel assemblies.
2. Place drain pans under the vehicle as needed.
3. Remove as much fluid from the remote power steering fluid reservoir as possible.
4. Disconnect the power steering gear inlet hose fitting (1) from the power steering pump.
5. Disconnect the power steering gear inlet hose fitting (1) from the steering gear.
6. Remove the power steering gear inlet hose from the vehicle.
Installation Procedure
1. Position the steering gear inlet hose to the vehicle.