XL-7 2WD V6-3.6L (2007)
Fuel Pressure Release: Service and Repair
Fuel Pressure Gage Installation and Removal
Fuel Pressure Gage Installation and Removal
Special Tool
J 34730-1A Fuel Pressure Gage
Installation Procedure
WARNING: Refer to Gasoline/Gasoline Vapors Caution.
WARNING: Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of
personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel
injection pump, or the connections. In order to reduce the risk of personal injury, cover the fuel system components with a shop towel before
disconnection. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With J 34730-1A) Fuel Pressure Relief (Without J 34730-1A).
