XL-7 2WD V6-3.6L (2007)
2. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
3. Perform any tests and/or diagnostics as needed. For the proper usage of the J 34730-1A, refer to the manufacture's directions.
Removal Procedure
1. Relieve the fuel system pressure, if required. Perform the following steps:
WARNING: Wrap a shop towel around the fuel pressure connection in order to reduce the risk of fire and personal injury. The towel
will absorb any fuel leakage that occurs during the connection of the fuel pressure gage. Place the towel in an approved container when
the connection of the fuel pressure gage is complete.
a. Wrap a shop towel around the fuel rail service port.
b. Place the hose on the J 34730-1A into an approved gasoline container.
c. Open the valve on the J 34730-1A in order to bleed any fuel from the fuel rail.
d. Close the valve on the J 34730-1A.
e. Remove the hose on the J 34730-1A from the approved gasoline container.
f.
Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
CAUTION: Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the
system:
-
The fuel pipe connections
