XL-7 2WD V6-3.6L (2007)
Fuel Tank Unit: Service and Repair
Primary Fuel Tank Module Replacement
Primary Fuel Tank Module Replacement
Special Tool
J 45722 Fuel Sender Lock Ring Wrench
Removal Procedure
NOTE: NEW fuel tank module seals are necessary each time the fuel tank module is serviced. Obtain NEW seals for both the primary and secondary
modules prior to beginning this service procedure.
WARNING: Whenever fuel line fittings are loosened or removed, wrap a shop cloth around the fitting and have an approved container
available to collect any fuel.
CAUTION: Clean all fuel pipe and hose connections and surrounding areas before disassembling to avoid possible contamination of the fuel
system. Spray the fuel pump module cam-lock ring tang with penetrating oil prior to attempting removal.
1. Remove the fuel tank. Refer to Fuel Tank Replacement (FWD) Fuel Tank Replacement (AWD).
