XL-7 2WD V6-3.6L (2007)
Fuel Tank Unit: Service and Repair
Secondary Fuel Tank Module Replacement
Secondary Fuel Tank Module Replacement
Special Tool
J39765-A Fuel Sender Lock Ring Tool
Removal Procedure
NOTE: A NEW fuel tank module seal is necessary each time the fuel tank module is serviced. Obtain a NEW seal prior to beginning this service
procedure.
WARNING: Whenever fuel line fittings are loosened or removed, wrap a shop cloth around the fitting and have an approved container
available to collect any fuel.
CAUTION: Clean all fuel pipe and hose connections and surrounding areas before disassembling to avoid possible contamination of the fuel
system. Spray the fuel pump module cam-lock ring tang with penetrating oil prior to attempting removal.
1. Remove the fuel tank. Refer to Fuel Tank Replacement (FWD) Fuel Tank Replacement (AWD).
2. Disconnect the EVAP vent line quick connect. Refer to Plastic Collar Quick Connect Fitting Service.
CAUTION: To prevent retainer damage, do not attempt to remove the retainer with a 12 in. or shorter ratchet/breaker bar.
