suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Engine Controls - Pass-Through Reprogramming|Page 12133 > < Engine Controls - ECU programming Verification|Page 12128
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Pass-Through Reprogramming

GENERAL

Section Title: General Info
TSB No. TS 04 09086

Division: Automotive 
Category: Technical

SUBJECT:
PASS-THRU REPROGRAMMING SOFTWARE VERSION 1.8.0.2

MODEL(S):
ALL

YEAR:
1996~

CONDITION:
A new pass-thru reprogramming software version number 1.8.0.2, must be downloaded and installed prior to downloading and installing the database
version 2.006.0728 and any future database versions, unless notified of a change.

CAUSE:
Electronic Control Unit (ECU) damage may occur if the newest database is used with software version 1.6.0.1.

CORRECTION:
Follow the below procedure to check version information in your PC. If you do not have the latest version p1 ease download and install the software and
database from Suzuki Pitstop.

The new Pass-Thru Reprogramming Software version 1.8.0.2 must be downloaded prior to downloading the new Database version 2.006.0728. Please
check the version currently loaded on your PC by following the below instruction. If you have the latest Pass-Thru Reprogramming (1.8.0.2), no action is
required. If you do not have the latest version please download the Software first and install it. Then download the Database and install it.

To check the version of your Pass-Thru Reprogramming Software

Engine Controls - Pass-Through Reprogramming|Page 12133 > < Engine Controls - ECU programming Verification|Page 12128