XL-7 2WD V6-3.6L (2007)
9. Fill the fixture plastic reservoir with water or sand.
10. Mount the seat belt pretensioner (1) in the SIR deployment fixture (3) with the open end facing up using the following mounting method.
^
Adjust and secure the J 39401-B arms (4) to the deployment fixture, with the short slotted portions of the arms standing vertically and facing
toward the center of the deployment fixture.
^
To mount, use the proper size bolt (2) and nut (5) with washers in order to secure the seat belt pretensioner (1) to the deployment fixture
brackets.
^
Securely tighten all fasteners prior to deployment.
11. Inspect the J 38826 and the appropriate pigtail adapter for damage. Replace as needed.
