XL-7 2WD V6-3.6L (2007)
5. Install the transaxle mount and transaxle mount bolts
Tightening torque
Tighten to 50 Nm (37 ft. lbs.).
6. Install the transaxle mount bolt (1).
Tightening torque Tighten to 110 Nm (81 ft. lbs.).
7. Than any excess fluid from the vehicle and remove the drain pans.
8. Install the intermediate steering shaft lower bolt.
9. Connect the rack and pinion outer tie rods to the steering knuckles.
10. Fill and bleed the power steering system.
11. Adjust the front toe.
