XL-7 2WD V6-3.6L (2007)
CAUTION:
Refer to [Fastener Notice]
6. Install the transaxle oil cooler line assembly nut.
Tightening torque
Tighten the transaxle cooler line retaining nut to 7 Nm (62 in. lbs.).
7. Lower the vehicle.
NOTE:
Dexron III automatic transmission fluid is not compatible with this transaxle. If Dexron III ATF is used, transaxle failure will result. This transaxle
uses GM T-IV I flu id P/N 88900925.
8. Add fluid to the transaxle.
9. Start the engine and check for leaks.
