XL-7 2WD V6-3.6L (2007)
Selector Shaft: Service and Repair
Automatic Transmission Range Selector Lever Replacement
Special Tool
J 36346 Fascia Retainer Remover
Removal Procedure
1. Remove the battery tray.
2. Ensure that the shift control range select lever is in the park (P) position.
3. Using the J 36346, disconnect the shift control cable (1) from the transaxle range switch lever (4).
4. Depress the shift control cable retainer clip tabs (2) and remove the shift control cable from the shift control cable bracket (3).
5. Remove the transaxle range selector lever nut and lever.
Installation Procedure
