XL-7 2WD V6-3.6L (2007)
CAUTION:
Refer to [Fastener Notice]
1. Install the transaxle range selector lever and lever nut.
Tightening torque
Tighten the nut to 16 Nm (12 ft. lbs.).
2. Install the shift control cable (2) to the shift control cable bracket (3). Ensure the shift control cable retaining tabs fully engage the shift control
cable bracket.
3. Connect the shift control cable (1) to the transaxle range switch lever (4).
4. Install the battery tray.
