XL-7 2WD V6-3.6L (2007)
Shift Cable: Service and Repair
Shift Control Cable Replacement
Shift Control Cable Replacement
Special Tool
J 36346 Fascia Retainer Remover
Removal Procedure
1. Set the parking brake.
2. Disable the supplemental inflatable restraint (SIR) system.
3. Remove the battery tray.
4. Using the J 36346, disconnect the shift control cable (1) from the transaxle range switch lever (4).
5. Depress the shift control cable retainer clip tabs (2) and remove the shift control cable from the shift control cable bracket (3).
6. Remove the shift control lever knob.
7. Remove the console.
8. Ensure that the shift control range select lever is in the park (P) position.
9. Using the J 36346, disconnect the shift control cable from the shift control range select lever pin.
10. Depress the shift control cable retainer clip tabs and remove the cable from the shift control.