XL-7 2WD V6-3.6L (2007)
2. Hand tighten the front transaxle mount thru bolt.
NOTE:
The front and rear transmission mounts must be allowed to settle with the thru bolts loosened.
3. Loosen the rear transmount thru bolt.
4. Tighten the transmission mount thru bolts in the following order.
Tightening torque
1. Tighten the rear bolt to 100 Nm (74 ft. lbs.).
2. Tighten the front bolt to 100 Nm (74 ft. lbs.).
5. Lower the vehicle.
Transmission Mount Replacement - Left Side
Transmission Mount Replacement - Left Side
Removal Procedure
1. Raise and support the vehicle.
2. Support the transaxle with a height adjustable transmission stand.
3. Remove the transaxle mount to frame nuts (4).
4. Remove the transaxle mount to bracket nuts (2).
5. Raise the transaxle enough to provide clearance between the frame and mount bracket (1) in order to remove the mount (3).
