XL-7 2WD V6-3.6L (2007)
Quarter Window Glass: Service and Repair
Quarter Window Replacement
Special Tool
J 24402-A Glass Sealant (Cold Knife) Remover
J 39032 Stationary Glass Removal Tool
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
Isopropyl Alcohol or equivalent
Cartridge-type Caulking Gun
Commercial-type Utility Knife
Razor Blade Scraper
Suction Cups
Plastic Paddle
Removal Procedure
WARNING: Refer to [Cracked Window Caution].
1. Remove the rear quarter front applique.
NOTE: Before cutting out a quarter window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior
trim.
2. Open the liftgate.
3. Remove the inside garnish molding.
WARNING: Refer to [Defroster Outlet Caution].
4. Cover the following parts to protect from broken glass:
^
Upper dash pad
^
Defroster outlets and A/C outlets
^
Seats and carpeting
WARNING: Refer to [Glass and Sheet Metal Handling Caution].