suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Starting and Charging > < Toothed Ring Replacement|Page 2831
Page 4
background image

-

Check sensor (pole piece) for damage or bent. 

-

Check sensor for resistance.
Resistance between terminals (Rear wheel speed sensor) 1.2 - 1.6 k Ohms at 20°C (68°F)

Resistance between terminal and sensor body (Rear wheel speed sensor) 1 M Ohms or more 

If any faulty is found, replace.

Starting and Charging > < Toothed Ring Replacement|Page 2831