4 Runner 2WD L4-2.7L (2TR-FE) (2010)
(c) w/ Engine Hood Courtesy Switch:
Connect the connector.
(d) w/o Engine Hood Courtesy Switch:
Connect the connector cap.
(e) Install the hood lock assembly with the 3 bolts.
Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
6. INSTALL HOOD LOCK CONTROL CABLE COVER
(a) Pass the hood lock control cable assembly through the hood lock control cable cover.
(b) Attach the claw to install the hood lock control cable cover.
(c) Install the 2 screws.
7. INSTALL LOW PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/Installation
8. INSTALL HIGH PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/Installation
9. INSTALL RADIATOR GRILLE BRACKET See: Grille/Service and Repair/Installation
10. INSTALL RADIATOR GRILLE See: Grille/Service and Repair/Installation
11. INSTALL UPPER RADIATOR SUPPORT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation