4 Runner 2WD L4-2.7L (2TR-FE) (2010)
Trunk / Liftgate Lock: Testing and Inspection
DOOR LOCK: BACK DOOR LOCK: INSPECTION
1. INSPECT BACK DOOR LOCK ASSEMBLY
(a) Set the back door lock to the full-latch position.
(b) Apply battery voltage to the door motor connector and check the operation of the door lock motor.
OK:
*
If the result is not as specified, replace the back door lock assembly.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
*
If the result is not as specified, replace the back door lock assembly.