4 Runner 2WD L4-2.7L (2TR-FE) (2010)
/Page-1117001.png)
Variable Valve Timing Actuator: Service and Repair
Removal
2TR-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL
1. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
(a) Detach the 2 clamps and disconnect the 2 connectors.
(b) Remove the bolt and disconnect the wiring harness clamp bracket.
(c) Disconnect the camshaft timing oil control valve connector.
(d) Remove the bolt and camshaft timing oil control valve.
(e) Remove the O-ring from the camshaft timing oil control valve.