4 Runner 2WD L4-2.7L (2TR-FE) (2010)
/Page-311001.png)
Refrigerant Pressure Sensor / Switch: Testing and Inspection
HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: ON-VEHICLE INSPECTION
1. INSPECT NO. 1 PRESSURE SWITCH
(a) Connect a manifold gauge set.
(b) Connect the positive (+) lead from the ohmmeter to terminal 1 and the negative (-) lead to terminal 2.
(c) Measure the resistance between terminals when refrigerant pressure is charged, as shown in the illustration.
If operation is not as specified, replace the pressure switch.