4 Runner 2WD L4-2.7L (2TR-FE) (2010)
7. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
(a) Remove the clamp and disconnect the pressure feed tube (return tube side) from the steering gear.
(b) Using a union nut wrench, disconnect the pressure feed tube (pressure feed tube side) from the steering gear.
(c) Remove the bolt and disconnect the pressure feed tube clamp.
8. REMOVE RACK AND PINION POWER STEERING GEAR ASSEMBLY
(a) Remove the 2 bolts, 2 nuts and steering gear assembly.
Installation
STEERING GEAR / LINKAGE: STEERING GEAR: INSTALLATION
1. INSTALL RACK AND PINION POWER STEERING GEAR ASSEMBLY
(a) Install the steering gear assembly with the 2 bolts and 2 nuts.
Torque : 120 Nm (1224 kgf-cm, 89 ft-lbf)
HINT
Hold the bolts and tighten the nuts to install the steering gear assembly.
2. CONNECT PRESSURE FEED TUBE ASSEMBLY
(a) Install the pressure feed tube clamp with the bolt.
Torque : 28 Nm (286 kgf-cm, 21 ft-lbf)