4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Disconnect Brake Lines From ABS Actuator
Using Special Service Tool (SST) # 09023 - 00100, disconnect the 5 brake lines from the Anti-Lock Brake System (ABS) actuator.
Torque: 15 Nm (11 ft. lbs.)
2. Disconnect connectors.
Disconnect the 2 connectors from the actuator.
3. Remove ABS actuator.
(a) Remove the 3 bolts and ABS actuator assembly.
Torque: 19 Nm (14 ft. lbs.)
(b) Remove the 3 nuts and ABS actuator from the actuator bracket.
Torque: 5.4 Nm (48 inch lbs.)
(c) Remove the 3 holders and cushions from the ABS actuator.
INSTALLATION
Installation is in the reverse order of removal.
After installation, fill brake reservoir with brake fluid, bleed brake system. See: Brake Bleeding/Service and Repair
Check for leaks.