4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) METER REMOVAL AND INSTALLATION
REMOVAL
1. Remove air cleaner cap with MAF meter.
(a) Disconnect the MAF meter connector and wire clamp.
(b) Loosen the air cleaner hose clamp.
(c) Disconnect the air hose from the air cleaner cap.
(d) Loosen the 4 clips, and remove the air cleaner cap together with the MAF meter.
2. Remove MAF meter from air cleaner cap.
(a) Remove the 4 nuts, MAF meter and gasket.
INSTALLATION
1. Install MAF meter to air cleaner cap.
(a) Place a new gasket on the air cleaner cap.
(b) Install the MAF meter with the 4 nuts.
Torque: 8.5 N.m (85 kgf.cm, 74 in.lbf)
2. Install MAF meter with air cleaner cap.
