4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
Stabilizer Bar: Testing and Inspection
Front
Front Suspension / Stabilizer Bar
BALL JOINT INSPECTION
Inspect the ball joint for rotation condition, by performing the following:
1. As shown, flip the ball joint stud back and forth five times, before installing the nut.
2. Using a torque wrench, turn the stud continuously one turn each 2 - 4 seconds and take the torque reading on the fifth turn. The turning torque
is 0.05 - 2.0 Nm (0.4 -17 inch lbs.).
