4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
d. Using a plastic hammer, tap on the ring gear to separate it from the differential case.
20. Using the 0995-40010 (09951-4010, 09952-04010, 09953 - 04020, 09954 - 04010, 09954 - 04010, 09955-04060, 09957-4010, 09958 - 04010),
09950-60010 (09951-00480) SST, remove the two side bearings from the differential case.
NOTE: Fix the claws of SST to the notch in the differential case.
21. Disassemble the differential case assembly, doing the following.
a. Using a pin punch and hammer, remove the straight pin.
b.
Remove these parts from the differential case, the pinion shaft, the two pinion gears, two pinion gear thrust washers, two side gears and the two
side gear thrust washers.
22. If the vehicle came w/ A.D.D., using a brass bar and hammer, remove the two bearings.
Assembly