4 Runner 2WD L4-2693cc 2.7L DOHC MFI (1997)
c. Using the SST 09950-30010 (09951-03010, 09953-03010, 09954-03010, 09955-3030, 0995-03030) and the companion flange, install the
front bearing, then remove the companion flange.
12. Install the new oil seal.
a. Apply MP grease to a new oil seal.
b. Using the SST 092104-76011 and a hammer, install the oil seal.
Oil seal drive in depth: 1.0 mm (0.039 inch).
13. Install the companion flange.
a. Place the companion flange on the drive pinion.
b. Apply light coat of hypoid gear oil on threads of a new companion flange nut.
c. Using the SST 09330-00021 to hold the flange, tighten the nut.
Torque: 196 Nm (145 ft. lbs.).
14. Adjust the drive pinion preload.
15. Stake the drive pinion nut.
16. Install the rear propeller shaft.
17. Fill the differential with hypoid gear oil.
Torque: 49 Nm (36 ft. lbs.)
Oil type: Hypoid gear oil API GL-5
Recommended oil viscosities:
