4 Runner 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1992)
(a) Temporarily install the crankshaft pulley bolt and turn the crankshaft two revolutions from TDC to TDC.
HINT:
^
Always turn the crankshaft clockwise.
(b) Check that each pulley aligns with the marks as shown in the illustration.
(c) Torque the No.1 idler pulley bolt.
Torque: 37 N.m (38 kgf.cm, 27 ft.lbf)
(d) Remove the camshaft timing pulley bolts.
(e) Align the camshaft match pin hole with camshaft match pin hole.
(f) Install the match pin and camshaft pulley bolt.