4 Runner 4WD L4-2.7L (3RZ-FE) (1996)
DISASSEMBLY
1. REMOVE ROTOR
2. REMOVE IGNITION COIL DUST COVER
-
Remove the dust cover.
-
Remove the dust proof packing.
3. REMOVE IGNITION COIL
-
Remove the 2 nuts, and disconnect the 3 wires from the ignition coil terminals.
-
Remove the 4 screws and ignition coil.
4. REMOVE SIGNAL GENERATOR (PICKUP COIL)
-
Remove the 2 screws and signal generator (pickup coil) from the distributor housing.
5. REMOVE CONDENSER
-
Remove the screw and condenser.
INSPECTION
INSPECT SHAFT