4 Runner 4WD L4-2.7L (3RZ-FE) (1996)
EFI Main Relay: Testing and Inspection
1. REMOVE EFI MAIN RELAY (Marking: EFI)
2. INSPECT EFI MAIN RELAY
-
Using an ohmmeter, check that there is continuity between terminals 1 and 2.
-
If there is no continuity, replace the relay.
-
Check that there is no continuity between terminals 3 and 4.
-
If there is continuity, replace the relay.
-
Apply battery positive voltage across terminals 1 and 2.
-
Using an ohmmeter, check that there is continuity between terminals 3 and 4.
-
If operation is not as specified, replace the relay.
3. REINSTALL EFI MAIN RELAY