4 Runner 4WD L4-2.7L (3RZ-FE) (1996)
Transmission Temperature Sensor/Switch: Service and Repair
1. DISCONNECT ATF TEMPERATURE SENSOR CONNECTOR
2. REMOVE ATF TEMPERATURE SENSOR
-
Remove the ATF temperature sensor.
-
Remove the O-ring from the ATF temperature sensor.
3. INSTALL ATF TEMPERATURE SENSOR
-
Coat a new O-ring with ATF and install it to the ATF temperature sensor.
-
Install the ATF temperature sensor
Torque: 15 N.m (150 kgf.cm, 11 ft.lbf)
4. CONNECT ATF TEMPERATURE SENSOR CONNECTOR
INSTALLATION NOTICE: Be careful not to twist the wire harness.