4 Runner 4WD L4-2.7L (3RZ-FE) (1996)
/Page-1059001.png)
Four Wheel Drive Selector Relay: Testing and Inspection
INSPECTION
1. INSPECT 2-4 SELECTOR SWITCH CONTINUITY
If continuity is not as specified, replace the shift lever knob.
2. INSPECT ACTUATOR RESISTANCE
a. Using an ohmmeter, measure the resistance between terminals 2 and 3.
Standard resistance: 0.3 - 100 ohms
b. Using an ohmmeter, measure the resistance between terminals 2 or 3 and body ground.
