4 Runner 4WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1987)
/Page-933002.png)
Fig. 18 Positioning front suspension for torsion bar replacement. Pickup & 4Runner w/2 wheel drive
Fig. 19 Measuring torsion bar adjusting bolt height dimension A. Pickup & 4Runner w/2 wheel drive
Fig. 20 Measuring torsion bar adjusting bolt height dimension B. Pickup & 4Runner w/2 wheel drive
13.
Lower vehicle unit clearance between spring bumper on lower arm and frame is .051 inch (13 mm), Fig. 18. Install anchor arm onto torsion bar
until adjusting bolt protrusion dimension A is .31-1.10 inch (8-28 mm), Fig. 19, on 1/2 ton models or .43-1.22 inch (11-31 mm) on 3/4 ton and