4 Runner 4WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1987)
1. INSTALL FREE WHEELING HUB BODY
(a) Place a new gasket in position on the front axle hub.
(b) Install the free wheeling hub body with the six cone washers and nuts.
Torque: 315 kg-cm (23 ft-lb, 31 N.m)
2. INSTALL BOLT WITH WASHER
Torque: 185 kg-cm (13 ft-lb, 18 N.m)
3. APPLY MP GREASE TO INNER HUB SPLINES
4. INSTALL FREE WHEELING HUB COVER WITH NEW GASKET
(a) Set the control handle and clutch to the FREE position.
(b) Place a new gasket in position on the cover.