4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1169002.png)
Parts Information
Repair Procedure No. 1
NOTE:
ONLY perform Repair Procedure No.1 if the VIN falls BEFORE the Production Change Effective VIN listed in the Production Change Information
table.
1.
Select air source.
A.
Turn the ignition switch to the ON position.
B.
Turn the air select switch to the recirculating position.
C.
Turn the ignition switch off and disconnect the negative battery terminal.
WARNING:
Failure to complete step "C" above may result in internal damage to the transfer case shifting mechanism.
2.
Remove instrument panel under cover sub-assembly No. 2.
A.
Remove the screw.
B.
Disengage the 3 clips and remove the instrument panel under cover sub-assembly No. 2.
