4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
![background image](/toyota/4_runner_4wd/v8-4.7l_(2uz-fe)/Page-1169005.png)
B.
Remove the 3 bolts and blower motor.
8.
Apply sealant.
A.
Blow air into the cooling air intake of the blower motor to remove any remaining water.
B.
Using a cloth, wipe any water, dirt or dust from inside the blower case.
C.
Apply sealant to the contact surface of the blower case, as shown in the illustration.
D.
Rub the sealant onto the contact surface with your finger while wearing vinyl gloves (or equivalent).