4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
![background image](/toyota/4_runner_4wd/v8-4.7l_(2uz-fe)/Page-1025001.png)
Auxiliary Power Outlet: Service and Repair
Removal and Installation
Center
REPLACEMENT
1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSY
2. REMOVE CONSOLE PANEL SUB-ASSY UPPER
3. REMOVE CONSOLE UPPER PANEL GARNISH NO.1
4. REMOVE CONSOLE UPPER PANEL GARNISH NO.2
5. REMOVE CONSOLE BOX ASSY REAR
6. REMOVE POWER OUTLET SOCKET ASSY CTR
a. Release the 2 fitting claws, remove the power outlet socket assy CTR.
Rear
REPLACEMENT
1. REMOVE TONNEAU COVER RETRACTOR SUB-ASSY
2. REMOVE BACK DOOR WEATHERSTRIP
3. REMOVE DECK BOARD SUB-ASSY
4. REMOVE DECK BOARD ASSY
5. REMOVE REAR FLOOR MAT SUPPORT PLATE REAR
6. REMOVE DECK FLOOR BOX RH
7. REMOVE DECK TRIM COVER REAR
8. REMOVE DECK TRIM SIDE BOARD UPR RH
9. REMOVE SIDE TRIM BOX ASSY RH
10. REMOVE REAR DOOR SCUFF PLATE RH
11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
12. REMOVE DECK TRIM SIDE PANEL ASSY RH
13. REMOVE POWER POINT SOCKET ASSY RR
a. Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power point socket
cover RR, and push out the socket to the room side.