4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1091006.png)
20. REMOVE TIE ROD END SUB-ASSY LH
a. Place matchmarks on the tie rod end, lock nut and rack end.
b. Loosen the lock nut, remove the tie rod end and lock nut.
21. REMOVE TIE ROD END SUB-ASSY RH
HINT: Remove the RH side by the same procedures with the LH side.
22. REMOVE STEERING RACK BOOT CLAMP LH
a. Using pliers and a screwdriver, loosen the clamp.
NOTICE: Be careful not to damage the boot.
HINT: Mark the RH and LH boots.
23. REMOVE STEERING RACK BOOT CLAMP RH
HINT: Remove the RH side by the same procedures with the LH side.
24. REMOVE STEERING RACK BOOT CLIP LH
a. Using pliers, remove the clip.
NOTICE: Be careful not to damage the boot.
25. REMOVE STEERING RACK BOOT CLIP RH
HINT: Remove the RH side by the same procedures with the LH side.
26. REMOVE STEERING RACK BOOT LH
27. REMOVE STEERING RACK BOOT RH
28. REMOVE STEERING RACK END SUB-ASSY
a. Using a screwdriver and a hammer, stake back the washer.
NOTICE: Avoid any impact to the steering rack.