4 Runner 4WD V8-4.7L (2UZ-FE) (2003)
22. INSTALL REAR AXLE LH HUB BOLT
a. Install a new deflector gasket and deflector to the rear axle shaft.
HINT: Align the 2 notches.
b. Pass the 6 bolts through the axle hub.
c. Pass a washer plate, as shown in the illustration, through the hub bolt, and install the hub bolt as tightening the hub nut.
23. INSTALL REAR AXLE HUB & BEARING ASSY LH
24. INSTALL PARKING BRAKE PLATE TO REAR AXLE HOUSING BOLT
a. Position the backing plate on a rear axle bearing assy LH and install the 4 parking brake plate to rear axle housing bolts using 2 socket
wrenches and a press.
25. INSTALL REAR AXLE SHAFT PLATE WASHER
a. Install the rear axle shaft plate washer to the rear axle shaft LH.
26. INSTALL REAR AXLE BEARING RETAINER INNER LH
a. Install a new rear axle bearing retainer inner LH to the rear axle shaft LH.
27. INSTALL REAR AXLE SHAFT LH
a. Using SST and a press, install the rear axle shaft LH to the rear axle bearing assy LH.
SST 09521-25011