4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
/Page-538001.png)
Valve: Service and Repair
Removal
1. Using Special Service Tool (SST) Valve Spring Compressor # 09202 - 70020 or equivalent, compress the valve spring and remove the 2 keepers.
2. Remove these parts:
-
Spring retainer.
-
Valve spring.
-
Valve.
3. Using needle-nose pliers, remove the oil seal.
4. Using compressed air and a magnetic finger, remove the spring seat by blowing air.
NOTE: Arrange the valves, valve springs, spring seats and spring retainers in the correct order.
