4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
Throttle Body: Testing and Inspection
On-Vehicle Inspection
ON-VEHICLE INSPECTION
1. Inspect throttle body.
Check that the throttle linkage moves smoothly.
2. Inspect throttle position sensor.
(a) Apply vacuum to the throttle opener.
(b) Disconnect the sensor connector.
Ohmmeter Connection
Reference
(c) Using an ohmmeter, measure the resistance between each terminal.
(d) Reconnect the sensor connector.
3. M/T: Inspect dashpot (DP).
(a) Allow the engine to warm up to normal operating temperature.
(b) Check idle speed.
Idle speed: 700 ±50 rpm