4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
![background image](/toyota/4_runner_limited_2wd/v6-3.4l_(5vz-fe)/Page-1948013.png)
16. Install the two turn pressure tubes, performing the following.
a. Install a new union seat to the rack housing and control valve housing.
b. Using the 09633-00020 SST, install the tube, tightening it to 20 Nm (15 ft. lbs.).
NOTE:
^
Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
^
This torque value is effective in case that SST is parallel to a torque wrench.