4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
/Page-1961001.png)
Control Arm Bushing: Service and Repair
Upper Suspension Arm Bushing
BUSHING REPLACEMENT
1. Remove the bushing, performing the following.
a. Using a chisel and hammer, pry up the flange of the bushing.
b. Using the 09613-26010, 09631-20060, 09950-0020 Special Service Tool (SST) and a press, remove the bushing.
2. Using 09223-00010, 09506-35010 SST and a press, install a new bushing.