4 Runner Limited 2WD V6-3.4L (5VZ-FE) (1997)
![background image](/toyota/4_runner_limited_2wd/v6-3.4l_(5vz-fe)/Page-1573005.png)
5. Using the 09308 00010 SST, remove the outer oil seal.
6. Replace the rear axle bearing by performing these steps.
a. Using the 09223 - 56010, 09950 60010 (09951 - 00560) SST and a press, remove the bearing.
b. Using the 09515-30010, 09950 - 60020 (09951 - 00890) SST and a press, install a new bearing.
7. Using the 09950-60010 (09951-00610), 0995-70010 (09951-7150) SST and a hammer, install a new outer oil seal.
8. Replace the bearing case by performing the following.
a. Remove the oil seal (outer side) and bearing.
b. Install four nuts to the serration bolts.
c. Using a hammer, remove the four serration bolts and remove the bearing case.