4 Runner SR5 2WD V6-3.4L (5VZ-FE) (1997)
/Page-2023001.png)
Blower Motor Switch: Service and Repair
Front Blower Switch
REMOVAL
1. REMOVE A/C CONTROL ASSEMBLY
See: Control Assembly/Service and Repair/Air Conditioning Control Assembly
2. REMOVE SWITCH
a. Remove the illumination light from the NC control assembly.
b. Using a screwdriver, pry loose the clip and push out the switch to rear of the heater control assembly.
REMOVAL HINT: Tape the screwdriver tip before use.
INSTALLATION
Installation is in the reverse order of removal.
