toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel Injector|Testing and Inspection > < Electrical Specifications|Page 3803
Page 3
background image

(f) Pinch the fuel return hose.

The pressure in the high pressure line will rise to approx. 400 kPa (4 kgf/sq. cm, 57 psi). In this state, check to see that there are no leaks from
any part of the fuel system.

NOTICE: Always pinch the hose. Avoid bending as it may cause the hose to crack.

(g) Turn the ignition switch to LOCK.
(h) Disconnect the TOYOTA hand-held tester from the DLC3.

Fuel Injector|Testing and Inspection > < Electrical Specifications|Page 3803