4 Runner SR5 2WD V6-3.4L (5VZ-FE) (1997)
Front Steering Knuckle: Service and Repair
Removal and Installation
Front Suspension / Front Axle Hub
REMOVAL
1. Remove the front wheel.
NOTE: When installing the front wheel, tighten the wheel to 110 Nm (83 ft. lbs.).
2. Remove the shock absorber.
3. Using a screwdriver, remove the grease cap.
4. For the four wheel drive model, disconnect the drive shaft performing the following.
a. Remove the cotter pin and lock cap.
b. While applying the brakes, remove the lock nut.