4 Runner SR5 2WD V6-3.4L (5VZ-FE) (1997)
b. Place SST 09350 - 30020 (09350 - 07030) on the spring retainer, and compress the return spring with a shop press.
c. Install the snap ring with a screwdriver. Be sure the end gap of the snap ring is not aligned with the count portion of the O/D support.
4. Install clutch drum thrust washer.
Coat the thrust washer with petroleum jelly and install it onto the O/D support.
HINT: Make sure that the lug shape matches the hole on the O/D support.
5. Check overdrive brake piston movement.
a. Place the O/D support assembly onto the direct clutch assembly.
b. Apply compressed air into the oil passage as shown, and be sure that the O/D brake piston moves smoothly.
Overdrive Clutch
NOTE: For removal and installation procedures refer to "Automatic Transmission/Transaxle, Service and Repair."
OVERDRIVE PLANETARY GEAR, OVERDRIVE DIRECT CLUTCH AND OVERDRIVE ONE-WAY CLUTCH DISASSEMBLY