Toyota Workshop Service and Repair Manuals

Fluid Pump: Specifications

SERVICE SPECIFICATIONS 

Body Clearance:

Standard .............................................................................................................................................................  0.07 - 0.15 mm (0.0028 - 0.0059 in.)
Maximum .......................................................................................................................................................................................  0.3 mm (0.012 in.)

Tip Clearance:

Standard .............................................................................................................................................................  0.11 - 0.14 mm (0.0043 - 0.0055 in.)
Maximum .......................................................................................................................................................................................  0.3 mm (0.012 in.)

Side Clearance:

Standard .............................................................................................................................................................  0.02 - 0.05 mm (0.0008 - 0.0020 in.)
Maximum .......................................................................................................................................................................................  0.1 mm (0.004 in.)

Pump Body Bushing Inside Diameter: 

Maximum .................................................................................................................................................................................  38.19 mm (1.5035 in.)

Stator Shaft Bushing Inside Diameter:

Front Side: 

Maximum ...........................................................................................................................................................................  21.58 mm (0.8496 in.)

Rear Side

Maximum ...........................................................................................................................................................................  27.08 mm (1.0661 in.)

TORQUE SPECIFICATIONS 

Oil Pump Body To Stater Shaft ........................................................................................................................................................  10 N.m (84 inch lbs.)
Oil Pump To Transmission Case .........................................................................................................................................................  22 N.m (16 ft. lbs.)